RX5
- Comment:
Hinweise zur Platinen-Revision 1.0
2009-09-30:
1) Die Angabe LT1117CST-3.3V war falsch!
Es muss ein LT1129CST-3.3 eingesetzt werden!
2) Bitte eine Brücke von C9 nach C10 löten, da ansonsten C8/C10/R2 nicht mit Masse versorgt werden.
3) Wenn ein Antennenkabel angelötet werden soll, bitte den Lötstopp-Lack von dem kleinen Stück Leiterbahn abkratzen.
- Wiki-Page:
targets/zigbit/rx-pwm5c4a
- Copyright:
Hardware by Ralf Kull
GPLv3
- Binary-Files:
- zigbit_rx-pwm5c4a-atmel.bin (24K / 0.8-1310062573)
- zigbit_rx-pwm5c4a-atmel.hex (68K / 0.8-1310062573)
- zigbit_rx-pwm5c4a-atmel.srec (48K / 0.8-1310062573)
- zigbit_rx-pwm5c4a-meshnetics.bin (24K / 0.8-1310062574)
- zigbit_rx-pwm5c4a-meshnetics.hex (68K / 0.8-1310062574)
- zigbit_rx-pwm5c4a-meshnetics.srec (48K / 0.8-1310062574)
- Eagle:
- RX5amp Version 1.0 2009_09_07/Servo Leiste 6.brd
RX5amp Version 1.0 2009_09_07/Servo Leiste 6.brd
- RX5amp Version 1.0 2009_09_07/Servo Leiste 6.sch
RX5amp Version 1.0 2009_09_07/Servo Leiste 6.sch
- RX5amp Version 1.0 2009_09_07/rx5amp.brd
RX5amp Version 1.0 2009_09_07/rx5amp.brd
- RX5amp Version 1.0 2009_09_07/rx5amp.sch
RX5amp Version 1.0 2009_09_07/rx5amp.sch
- rx5amp Version 1.1/Servo Leiste 6.brd
rx5amp Version 1.1/Servo Leiste 6.brd
- rx5amp Version 1.1/Servo Leiste 6.sch
rx5amp Version 1.1/Servo Leiste 6.sch
- rx5amp Version 1.1/rx5amp Version 1.1.brd
rx5amp Version 1.1/rx5amp Version 1.1.brd
- rx5amp Version 1.1/rx5amp Version 1.1.sch
rx5amp Version 1.1/rx5amp Version 1.1.sch
- Docs:
- RX5amp Version 1.0 2009_09_07/RX5amp Partlist.txt
- RX5amp Version 1.0 2009_09_07/rx5amp Bottom Names.pdf
- RX5amp Version 1.0 2009_09_07/rx5amp Bottom Values.pdf
- RX5amp Version 1.0 2009_09_07/rx5amp Top Names.pdf
- RX5amp Version 1.0 2009_09_07/rx5amp Top Values.pdf
- rx5amp Version 1.1/rx5amp Version 1.1 Bottom Names.pdf
- rx5amp Version 1.1/rx5amp Version 1.1 Bottom Values.pdf
- rx5amp Version 1.1/rx5amp Version 1.1 Top Names.pdf
- rx5amp Version 1.1/rx5amp Version 1.1 Top Values.pdf
